Plastic Mold Release Agent
Thoroughly clean the mold surface before use to remove oil, residues, and old release agent (use a dedicated cleaner or alcohol for wiping);
2.Dosage Control:
Apply a small and even amount; avoid excessive application to prevent surface defects such as shrinkage marks or uneven gloss;
3.Avoid Contamination:
Prevent the release agent from contacting the injection nozzle, barrel, or liquid raw materials, as it may affect curing performance;
4.Safe Operation:
Wear gloves and protective masks; ensure proper ventilation; avoid inhaling spray mist or skin contact;
5.Storage Conditions:
Keep sealed in a cool, dry place (5–35°C); avoid direct sunlight and keep away from fire sources.
Instructions for Use of Plastic Mold Release Agent
Mold Preparation:
Thoroughly clean the mold surface before use to remove oil, residues, and old release agent (use a dedicated cleaner or alcohol for wiping);
Dosage Control:
Apply a small and even amount; avoid excessive application to prevent surface defects such as shrinkage marks or uneven gloss;
Avoid Contamination:
Prevent the release agent from contacting the injection nozzle, barrel, or liquid raw materials, as it may affect curing performance;
Safe Operation:
Wear gloves and protective masks; ensure proper ventilation; avoid inhaling spray mist or skin contact;
Storage Conditions:
Keep sealed in a cool, dry place (5–35°C); avoid direct sunlight and keep away from fire sources.

Technical Specifications

1.Release Performance:
Release force ≤50N (for standard molds); continuous demolding ≥50 cycles per application (for PP, PE, and similar plastics);
2.Compatibility:
No adverse reaction with PP, PE, ABS, PC, epoxy resin, and other materials;
3.High Temperature Resistance:
Withstands injection molding temperatures up to 230°C (depending on grade); does not decompose or release harmful gases;
4.Residue:
Easy to clean; no cured residue; does not affect subsequent painting or printing processes;
5.Environmental Compliance:
VOC content ≤50 g/L (compliant with GB 18581-2020); free from heavy metals and halogens;
Applications
Thermoplastics
Suitable for mass production of PP, PE, ABS, PC, PA, and other materials prone to sticking;
Thermosetting Plastics
Used for molding epoxy resin, phenolic resin, and other materials with high curing shrinkage;
Complex Molds
Ideal for deep-cavity and thin-wall molds such as automotive parts and electronic housings;

Application Method

1.Spraying Method:
Shake well before use; spray evenly onto the mold surface (distance 20–30 cm, angle 45°) to form a thin film;
2.Wiping Method:
Apply a small amount onto a non-woven cloth and wipe evenly across the mold surface until slightly moist;
3.Reapplication Frequency:
Reapply every 5 production cycles depending on sticking conditions;
4.Post-Cleaning:
After production, remove residues with a dedicated cleaner to prevent buildup affecting future use;
Packaging
20 kg per container.
Storage and Shelf Life
Store in a dry, well-ventilated place at room temperature. Shelf life is 1 year.

Hot Tags: plastic mold release agent, China plastic mold release agent manufacturers, suppliers, factory
You Might Also Like
Send Inquiry












